How To Get Hair Out Of Office Chair Wheels?

Can you remember the last time you were able to move freely in your new office chair? Years or even months might have passed. Have you ever thought about why it stopped moving the way it used to?

We frequently dust and clean the fabric of office chairs since we all care about their gleaming appearance. However, wheels are rarely a concern until they stop you from moving smoothly.

You may think the lubricant has lessened. However, because of the static charge office chair wheels produce when rolling, they attract hair and other such particles.

Therefore, the cause of the jam might be dirt, debris, and filth that are tightly packed with hair. You can attempt to clean the caster wheels using a variety of methods.

However, it’s usually preferable to perform a complete cleaning by turning the chair over, taking the caster apart, and removing the hair manually.

If you’re interested in learning how to get hair out of office chair wheels, this article has you covered. Continue reading to learn the methods and pro tips for keeping your office chair clean.

Key Takeaways

• To get hair out of office chair wheels, you can use sharp objects like clippers or scissors, or you can just use your fingers.
• A thorough cleaning is always recommended. For that, you need to disassemble the wheels and casters. And then soapy water will do the job.
• If you continue to experience problems, you can simply swap the wheels and buy new ones.

Can you get hair out of office chair wheels?

Yes, you can eliminate this hair dust problem by using a few tools and following some methods. For example, you can use fingers, duct tape, clippers, tweezers, screwdrivers, soap, and water to clean the wheels without dissembling them.

On the other hand, if the chair wheels are detachable, which most modern chairs are, you can eject the casters and run a thorough cleaning. Experts also recommend it.

However, if cleaning seems like a challenging job and you need to clean a good number of chairs, you can hire a professional cleaning service if you have a budget.

Getting hair out of office chair wheels without disassembling

It can be laborious and time-consuming to remove the caster wheels from the office chairs and conduct a deep cleaning to get hairs and dirt out. That will do the job best.

However, if you choose to clean your office chair wheels without removing the casters, there are a few home tools and methods to do the job, and they are easy and safe to try. Below we share how you can get the hair out of your office chair wheels without disassembling the casters.

Try with your Fingers

The finest instrument to remove visible dust and hairs from the caster wheels of your office chair is your fingertips. Removing dirt and hair from the inner or side of the wheel is also simple. Additionally, the wheels could include sticky materials or chewing gum. Before using any equipment, use your fingertips to scrub away as much dirt as you can.

See Also: Are Office Chair Wheels Universal?

A comb can help

With a comb, long, tangled hairs can be removed. Use the comb to remove the hair from the wheel after carefully pulling it out. Although it could take some time, the result will be worthwhile. You should not harm the wheel while doing this, though.

Use a duct tape

Most of the hairs will be removed by the duct tape’s glue. Once you’ve used other methods to remove the majority of the hair, you can use this approach as a backup to remove the remaining hair.

Tear a section of duct tape, roll it around a stick and place it inside. The tape will lock onto them to remove the dirt from the wheels. Continue doing that until you see hairs.

Clippers and tweezers

You can remove lengthy hairs from the caster wheels with a pair of tweezers and clippers. Grab the tweezers as close as possible to the chair wheel and pull the hair out. If the hair is difficult to remove, try applying some elbow grease to help. It should work if you rub the region close to the hair with your fingertips in a circular manner.

Vacuum cleaner

Turn on the vacuum cleaner and connect the hose to the wheel. The suction will instantly remove the hair. Be careful and conduct this outside or in a room with good ventilation because the hair will be blown around.

Crochet hook or hooked needle

You can pull hair loops out of the way by catching them with a little crochet hook. The metal object known as a dental pick is long, thin, stiff, and hooked. Be careful not to stab yourself with a fish hook because they are highly sharp and frequently barbed.

Razors or scissors

Cut the hair by repeatedly slicing it with something long and pointed, such as a scissor, razor blade, or pocket knife. Use a tool like tweezers or pliers to grip the hair clumps as you cut them and pull them out.

Hair removal cream

A few hair removal treatments available on the market may remove hair off office chair wheels pretty well. Consult your neighborhood pharmacy for advice if you need help deciding which to purchase. Because these creams can be harsh on the skin, follow the instructions on the container carefully.

Hairspray

Spray the hairspray on the wheel and give it some time to dry. Hairspray will help in leasing the hair and making it simpler to remove. To remove the hair, use a brush or towel.

Drain Cleaner

Hair and other debris frequently build up in drains in sinks and showers, causing clogs. Many drain cleaners have strong caustics that may completely melt the hair. Pour drain cleaner into a bucket or tray and soak the casters for a few hours to dissolve the hair.

Use fire

Because hair is often covered in a thin coating of oil and is flammable, it burns exceptionally rapidly. A blowtorch, a lighter, or a heat gun can be useful, according to the recommendations of different people.

Burning hair stinks, so be sure to do this outside. Use fast, brief bursts of flame as opposed to a long burn. Additionally, if your wheels are plastic, avoid using heat for an extended time.

See Also: How Long Should An Office Chair Last?

Getting Hair Out of Office Chair Wheels After Disassembling Casters

It is simple to remove hair from the casters once they have been separated. Wheels on office chairs are often fastened together using screws. They ought should be simple to disassemble if you have a screwdriver. If not, pull them apart with a butter knife or similar tool. Take caution not to harm the wheel while doing this.

Remove the caster wheels

Turn your chair over so the wheels point straight into the air. The wheel and the chair base may be gradually lowered by inserting a standard screwdriver between them, and then it becomes easy. You can also remove certain casters with just your bare hands.

You can see how much hair is caught inside the wheel now that it has been completely separated. Grab a butter knife from the kitchen and use it to remove debris and clumps of loose hair. This will largely get rid of the dirt.

Use soap and water

Water can reach areas that tweezers and blades can’t, so you might have to work a bit harder on this one.

After removing the castor wheels, you can place them in a hot, soapy water dish to soak, potentially overnight. A fingernail brush can also sporadically remove the hairs as they get looser.

Detaching the hairs between your castors can also be accomplished by blasting them with a high-pressure hose.

Check for damage

It’s crucial to inspect the wheel for any potential damage once you’ve removed as much hair as you can from it. It will be necessary to replace the wheel if it is damaged. But if it’s merely filthy, you may clean it with a brush or a vacuum.

Rinse, wipe and lubricate

After properly cleaning the wheels, place them under a warm hairdryer for a few minutes to remove any collected drips while preventing a damp workplace floor. However, the plastic may get melted down if you place the hairdryer for too long.

Use a lubricant to make the wheels move more smoothly before reattaching them. Use greaseless lubrication for wheels with metal-to-metal contact; for wheels with plastic contact, use silicone lubricants.

Using a few drops of lubricant from the tube should be sufficient. To prevent drawing more dirt, remove any extra by wiping. After that, it’s time to reconnect the chair legs’ wheels.

When Do You Need to Replace the Caster Wheels?

You’re in luck if you’ve tried everything to remove the hair from the wheels but can’t or if cleaning caused any damage to the casters. Most office chairs’ casters are among the simplest and easiest components to change.

If your chair doesn’t already have casters built into it, which is uncommon, you can pull them off and replace them. While doing this, take care not to harm the chair’s base, but because you’ll be replacing them anyhow, you won’t need to be concerned about the casters’ condition.

In most situations, rubber wheels are preferable to conventional casters. They move much more smoothly, are more difficult to clog, and could even have brakes built in to keep you in position as they move.

The only drawback is that they are a little taller, so you might need to change the chair’s height to suit your ergonomics. Instead, you may experiment with glides. These perform admirably on low-pile carpets but struggle on hard surfaces, thick carpets, or chair mats.

See Also: How To Lower Office Chair Without Lever?

Do You Need to Keep an Office Chair Clean?

There are several reasons to keep an office chair clean, most of which go far beyond the basic idea of maintaining a clean environment.

The components that make up the chair may discolor or become infected with various insects if you allow problems build up. Messes left unattended could also shorten the chair’s lifespan in general.

When assembling your chair by yourself, pay close attention to where you place or arrange all of the included pieces according to the instructions. This is due to the fact that you may always consult the manufacturer’s recommendations when you need to clean it.

Keep in mind that various messes call for different cleaning techniques. Additionally, a knowledge on cleaning cat hair out of an office chair is mandatory for pet owners.

Tips on care and maintenance of chair wheels

• For your chair to continue moving easily, it’s crucial to properly oil the wheels.
• For casters, use clean-looking gel-based grease.
• Likewise, caster wheels utilized in filthy, dusty environments should be lubricated using dry materials.
• A greaseless lubricant should be used on metal wheels.
• Use silicone lubrication when using plastic wheels, too.
• Use hygienic practices as necessary. Occasionally, perhaps every day, sweep the floors.
• Grease and the majority of lubricants draw dirt. Wipe away any oil that remains after spraying.
• Always keep your floor tidy. The dirt and hair are picked up off the floor. Daily vacuuming will ensure that there are no hairs on the floor that might get caught in the caster wheels.
• Hairs frequently gather on carpets. Keep the carpet on your floors clean if they have any.

FAQs

Final Thoughts

You may either use your fingers or sharp implements like clippers or scissors to remove hair off office chair wheels.

Cleaning thoroughly is always advised. You must take the wheels and casters apart to do it. Soapy water will then finish the job. If you continue to experience problems, you may simply swap the wheels and buy new ones.

However, regular cleaning is always recommended to ensure that your office chair wheels do not become too dirty and require a thorough cleaning or replacement.